Figure 33: Inserting An Sfp Transceiver Into An Sfp Slot; Figure 34: Positioning The Sfp Handle In The Upright Position; Sfp Transceiver - Allied Telesis AT-x230-10GP Installation Manual

AT-x230-10GP, AT-x230-18GP and AT-x230-28GP Switches Installation Guide
3. Position the SFP transceiver with the label facing up.
4. Gently slide the transceiver into the SFP slot until it clicks into place as
shown in Figure 33.
F 33. I
IGURE NSERTING AN
5. Verify that the handle on the transceiver is in the upright position, as
shown in Figure 34. This secures the transceiver and prevents it from
being dislodged from the slot.
F 34. P
IGURE OSITIONING THE

SFP Transceiver

Handle
SFP
TRANSCEIVER INTO AN
SFP
HANDLE IN THE UPRIGHT POSITION
SFP
SLOT
65