Suspension; Shock Absorber Spring Preload Adjustment - Husqvarna TR 650 TERRA 2013 Workshop Manual

TR 650 TERRA 2013 - TR 650 STRADA 2013
A
SETTINGS AND ADJUSTMENTS

Suspension

The vehicle leaves the factory with standard settings for the front and rear sus-
pension that meet most requirements.
Before making any change and afterwards, if the adjustment is not
satisfactory, always start from the standard suspension setting
and increase or decrease the adjusting clicks, one at a time.

Shock absorber spring preload adjustment

This is easier to do if you lift the motorcycle at the centre so that
the rear wheel is released.
- Adjust the ring nut (1) using the spanner provided; by turning left "A", the
preload increases;
by turning right "B" the preload decreases.
Be careful not to touch hot exhaust pipe while adjusting the shock
absorber.
H11701
A: Wheelbase
B: Spring in its seat
1
H11702
1
B
H11703
D.15
A= 341 ± 1,5 mm (13,4252 ± 0,0591 in.)
B= 201 ± 1,5 mm (7,9134 ± 0,0591 in.)
A= 341 ± 1,5 mm (13,4252 ± 0,0591 in.)
B= 198 ± 1,5 mm (7,7953 ± 0,0591 in.)
Workshop Manual Ed. 09-2012
TERRA
H11704
STRADA
H11705