Maintenance; Daily - ALLIANCE 120 Series Installation, Operation & Maintenance Manual

Daily

1. Inspect the area surrounding tumble dryers,
remove all combustible materials, including lint,
before operating the machines.
2. Check cylinder for foreign objects to avoid
damage to clothing and equipment.
3. Clean lint from lint compartment and screen to
maintain proper airflow and avoid overheating.
WARNING
To reduce the risk of serious injury, do not
open the lint panel while the tumble dryer is
in operation. Before cleaning the lint
screen, open tumble dryer door and allow
cylinder to completely stop.
a. Open the lint panel.
b. Remove all accumulated lint in the lint
compartment area. Lightly brush any lint that
may be left on the lint screen.
c. Be sure the lint screen is not torn.
d. The lint screen is designed to completely
cover the entire opening in the lint screen
panel. Be sure that it does so.
e. Wipe lint off of the thermistor. Refer to
Figure 41.
f. Replace the lint compartment panel on the
tumble dryer ensuring a tight fit, and lock if
applicable.
4. At end of day, clean the machine's top, front and
side panels with mild detergent. Rinse with clean
water. DO NOT use products that contain alcohol
on the control panel.
72

Maintenance

W410R1
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
1 Thermistor
2 Lint Screen
Figure 41
1
TMB1266R
2
TMB1266R
70458101 (EN)