Projector Safety Features - Christie D4KLH60 Mirage 4KLH Installation Manual

Projector safety features

This diagram shows the location of the laser safety features on the projector.
A
B
C
D
Laser emission indicator lights
A
Bottom two LEDs on both sides emit white light when the lasers are armed. They are off when the lasers are
not armed.
Emergency stop
B
Turns off the laser modules off in an emergency.
Manual reset
C
Re-arms the system after a system shutdown. Pressing Manual Reset indicates it is safe to arm the lasers.
Remote interlock
D
Enables remote shutdown of the projector (optional).
Laser beam stop
E
Blocks the laser light path. Rotate the beam stop to Closed when performing service or maintenance on the
projector. The laser projector system cannot be armed when the laser beam stop is closed.
Fire alarm
F
Enables the projector to be connected to the facility fire alarm system (optional). When the alarm is
activated, the laser modules turn off.
Laser rack (interlock)
G
Connects the projector to the laser rack.
Laser interlock
H
Connects the projector to the laser modules. When the interlock is tripped, accessible radiation is reduced
below the maximum permissible exposure (MPE) level.
D4KLH60/Mirage 4KLH Installation Guide
020-101374-01 Rev. 1 (05-2014)
E F G H
Laser Safety Precautions
23