3.9.2 Precautions When Using Digital Shift
There are several checks and precautions that you must follow before using the digital shift
feature.
Make this check:
1. Use the binary commands or the CCT+ to set the camera for no digital shift.
2. Check the output of the camera under your normal lighting conditions with no digital shift and
note the readings for the brightest pixels.
• If any of the readings are above 128, do not use digital shift.
• If all of the readings are below 128, you can safely use the 2X digital shift setting.
• If all of the readings are below 64, you can safely use the 2X or 4X digital shift setting.
k
Basler A500
PRELIMINARY
Basic Operation and Features
3-37