PRELIMINARY
Camera Interface
also show the assignment for the frame valid bit and the line valid bit.These signals and the data
transmitted via the three Channel Link transmitter/receiver pairs are not assigned according to the
Camera Link standard. The Basler-specific connection is described in Tables
2-7
to 2-9. Note that
frame grabbers are available for the Basler-specific pin assignment.
Table
2-10
and FIgure
2-7
show the assignment of pixel data bits to the input pins on the Channel
Link transmitter X of the Camera Link in the camera and the corresponding output pins on the
Channel Link receiver X in the frame grabber for the A501
. They also show the assignment for
k
the frame valid bit and the line valid bit.
2-15
k
Basler A500