Basler A500k User Manual page 11

Specifications
Gain and Offset
Connectors
VGA monitor output
Power Requirements
Housing Size
(L x W x H)
Lens Adapters
Weight
without lens adapter:
with F-mount adapter:
Vibration
Shock
Bump
Conformity
Table 1-2: A500
k
Basler A500
PRELIMINARY
k
A504
Programmable via the frame grabber via a serial link
All versions:
A504k, A503k:
A504k:
640 x 480 pixels at
60 Hz
12 VDC ± 10 %; max
6 W
without connectors and lens adapter:
with connectors and F-mount adapter:
F-mount
~ 510 g
~ 600 g
tested according to DIN IEC 60068-2-6
3 axes, x, y, z
5 - 8.5 Hz / 1.5 mm
8.5 - 150 Hz/ 10 m/s²
tested according to DIN IEC 60068-2-27
3 axes, x, y, z
100 m/s², 11 ms, 3 shocks positive
100 m/s², 11 ms, 3 shocks negative
tested according to DIN IEC 60068-2-29
100 m/s², 11 ms, 100 shocks positive
100 m/s², 11 ms, 100 shocks negative
CE, FCC
Performance Specifications
k
k
A503
26 pin, 0.5", mini D ribbon (MDR) plug (data)
one 6 pin, Hirose HR (power)
one 4 pin, Hirose HR (flash control)
second 26 pin, 0.5", mini D ribbon (MDR) plug (data)
one 15 pin, high-density sub female (VGA monitor output)
-
12 VDC ± 10 %;
max 5.4 W
41.5 x 90 x 90 mm
78.8 x 90 x 90 mm
Introduction
k
A501
12 VDC ± 10 %; max
3 W
~ 520 g
~ 610 g
1-3