Shutterline Correction (A503K Only) - Basler A500k User Manual

4.2.4.9 Shutterline Correction (A503k Only)

Purpose: To set the shutterline correction value. See section
correction.
Type: This is a read or write command.
Read Command:
Response:
Write Command:
Response:
Data Format:
Data Range:
k
Basler A500
PRELIMINARY
Cmd-ID R/W-Flag
0x98 1
Cmd-ID R/W-Flag
0x98 0
Cmd-ID R/W-Flag
0x98 0
None
Byte 1 Gray value to be added to the 10 bit pixel value
Byte 2 0x00
Byte 3 0x00
The shutterline correction setting can range from 0 DN (0x000000) to 255 DN
(0x0000FF). The default setting is 12 DN (0x00000C).
Configuring the Camera
3.8 for more information on shutterline
Data Length Data
3
Data Length Data
3 3 Bytes
Data Length Data
3 3 Bytes
-
4-17