Table of Contents
Advertisement
4.2.4.11 Area of Interest Starting Column
Purpose:
To set the left starting column for the area of interest or to read the current starting column
setting. See section
Type:
This is a read or write command.
Read Command:
Response:
Write Command:
Response:
Data Format:
Data Range:The starting column can range from 0x0000 to 0x04F6. It can only be set in multiples
of 10.
When you set column n using this command, the actual starting column will be n + 1. For example, if
you set the starting column to 0 with this command, the actual starting column = 0 + 1 = 1.
4.2.4.12 Area of Interest Width in Columns
Purpose:
To set the width in columns for the area of interest or to read the current width setting. See
section
Type:
This is a read or write command.
Read Command:
Response:
Write Command:
Response:
Data Format:
Data Range:
k
Basler A500
PRELIMINARY
3.10
for details.
Cmd-ID
R/W-Flag
0xA9
Cmd-ID
R/W-Flag
0xA9
Cmd-ID
R/W-Flag
0xA9
None
Byte 1
Low byte of the starting pixel setting
Byte 2
High byte of the starting pixel setting
3.10
for details.
Cmd-ID
R/W-Flag
0xAB
Cmd-ID
R/W-Flag
0xAB
Cmd-ID
R/W-Flag
0xAB
None
Byte 1
Low byte of the length in pixel setting
Byte 2
High byte of the length in pixel setting
The width in columns can range from 0x000A to 0x0500. The width can only
be set in multiples of 10 (A504k, A501k) or 40 (A503k).
Data Length
1
2
Data Length
0
2
Data Length
0
2
Data Length
1
2
Data Length
0
2
Data Length
0
2
Configuring the Camera
Data
-
Data
2 Bytes
Data
2 Bytes
Data
-
Data
2 Bytes
Data
2 Bytes
4-19
Advertisement
Table of Contents
Troubleshooting
