Table of Contents
Advertisement
4.2.4.7 Positive Offset
Purpose:
To set the positive offset or to read the current positive offset setting. If you use OfsPos, set
OfsNeg to 0. See section
Type:
This is a read or write command.
Read Command:
Response:
Write Command:
Response:
Data Format:
Data Range:
k
Basler A500
PRELIMINARY
3.6
for more information on offset.
Cmd-ID
R/W-Flag
0x86
1
Cmd-ID
R/W-Flag
0x86
0
Cmd-ID
R/W-Flag
0x86
0
None
Byte 1
Negative offset setting
The positive offset setting can range from 0x00 to 0xFF. Since the offset is
mostly negative, we recommend to set this value to 0.
Configuring the Camera
Data Length
Data
1
Data Length
Data
1
1 Byte
Data Length
Data
1
1 Byte
-
4-15
Advertisement
Table of Contents
Troubleshooting
