Dsnu Constancy And Shutterline Correction Enable - Basler A500k User Manual

Configuring the Camera
4.2.4.8 DSNU Constancy and Shutterline Correction Enable (A503k Only)
Purpose: To enable/disable the DSNU constancy feature and/or the shutterline correction feature. See
section
information on shutterline correction.
Type: This is a read or write command.
Read Command:
Response:
Write Command:
Response:
Data Format:
4-16
PRELIMINARY
3.7 for more information on the DSNU constancy feature and section
Cmd-ID R/W-Flag
0x91
Cmd-ID R/W-Flag
0x91
Cmd-ID R/W-Flag
0x91
None
Byte 1 An ID that specifies the features.
Bit 0 Switches the DSNU constancy feature
Bit 4 Switches the shutterline correction feature
(see the table below)
ID DSNU Constancy and Shutterline Correction Features
0x00 DSNU constancy OFF, shutterline correction OFF
0x01 DSNU constancy ON, shutterline correction OFF
0x10 DSNU constancy OFF, shutterline correction ON
0x11 DSNU constancy ON, shutterline correction ON
Data Length
1 1
Data Length
0 1
Data Length
0 1
3.8 for more
Data
-
Data
1 Byte
Data
1 Byte
k
Basler A500