Gain; Negative Offset - Basler A500k User Manual

Configuring the Camera

4.2.4.5 Gain

Purpose: To set the gain (ADCref) or to read the current gain (ADCref) setting. See section
more information on gain.
Type: This is a read or write command.
Read Command:
Response:
Write Command:
Response:
Data Format:
Data Range:

4.2.4.6 Negative Offset

Purpose: To set the negative offset or to read the current negative offset setting. If you use OfsNeg,
set OfsPos to 0. See section
Type: This is a read or write command.
Read Command:
Response:
Write Command:
Response:
Data Format:
Data Range:
4-14
PRELIMINARY
Cmd-ID R/W-Flag
0x80 1
Cmd-ID R/W-Flag
0x80 0
Cmd-ID R/W-Flag
0x80 0
None
Byte 1 Gain setting
The gain setting can range from 0x00 to 0xFF. See the restrictions described
in section 3.6.
3.6 for more information on offset.
Cmd-ID R/W-Flag
0x84 1
Cmd-ID R/W-Flag
0x84 0
Cmd-ID R/W-Flag
0x84 0
None
Byte 1 Negative offset setting
The negative offset setting can range from 0x00 to 0xFF.
Data Length Data
1
Data Length Data
1 1 Byte
Data Length Data
1 1 Byte
Data Length Data
1
Data Length Data
1 1 Byte
Data Length Data
1 1 Byte
3.6 for
-
-
k
Basler A500