Read Microcontroller Firmware Version; Read Fpga Firmware Version; Read Temperature - Basler A500k User Manual

Configuring the Camera

4.2.6.7 Read Microcontroller Firmware Version

Purpose: To read the microcontroller firmware version.
Type: This is a read only command.
Read Command:
Response:
Data Format:

4.2.6.8 Read FPGA Firmware Version

Purpose: To read the FPGA firmware version.
Type: This is a read only command.
Read Command:
Response:
Data Format:

4.2.6.9 Read Temperature

Purpose: To read the camera's temperature. The temperature is measured on the inner PCB.
Type: This is a read only command.
Read Command:
Response:
Data Format:
4-26
PRELIMINARY
Cmd-ID R/W-Flag
0x40 1
Cmd-ID R/W-Flag
0x40 0
Byte 1 Low byte of firmware version
Byte 2 High byte of firmware version
Byte 3 Register Layout ID
Cmd-ID R/W-Flag
0x41 1
Cmd-ID R/W-Flag
0x41 0
Byte 1 Low byte of firmware version
Byte 2 High byte of firmware version
Byte 3 Register Layout ID
Cmd-ID R/W-Flag
0x70 1
Cmd-ID R/W-Flag
0x70 0
The result is given in °C as 8 bit signed number.
Data Length Data
3
Data Length Data
3 3 Bytes
BCD coded
BCD coded
Data Length Data
3
Data Length Data
3 3 Bytes
BCD coded
BCD coded
Data Length Data
1
Data Length Data
1 1 Byte
-
-
-
k
Basler A500