Table of Contents
Advertisement
Configuring the Camera
4.2.4.13 Area of Interest Starting Line
Purpose:
To set the starting line for the Area of Interest or to read the current starting pixel setting.
See section
Type:
This is a read or write command.
Read Command:
Response:
Write Command:
Response:
Data Format:
Data Range:
4.2.4.14 Area of Interest Height in Lines
Purpose:
To set the height in lines for the Area of Interest or to read the current height setting. See
section
Type:
This is a read or write command.
Read Command:
Response:
Write Command:
Response:
Data Format:
Data Range:
4-20
PRELIMINARY
3.10
for details.
Cmd-ID
R/W-Flag
0xA8
Cmd-ID
R/W-Flag
0xA8
Cmd-ID
R/W-Flag
0xA8
None
Byte 1
Low byte of the starting pixel setting
Byte 2
High byte of the starting pixel setting
The starting line setting can range from 0x0000 to 0x03FF. (Note that the
starting pixel = n +1 where n is the value of the starting pixel setting.)
3.10
for details.
Cmd-ID
R/W-Flag
0xAA
Cmd-ID
R/W-Flag
0xAA
Cmd-ID
R/W-Flag
0xAA
None
Byte 1
Low byte of the length in pixel setting
Byte 2
High byte of the length in pixel setting
The height in lines setting can range from 0x0002 to 0x0400.
Data Length
1
2
Data Length
0
2
Data Length
0
2
Data Length
1
2
Data Length
0
2
Data Length
0
2
Data
-
Data
2 Bytes
Data
2 Bytes
Data
-
Data
2 Bytes
Data
2 Bytes
k
Basler A500
Advertisement
Table of Contents
Troubleshooting
