HP procurve 420 Management And Configuration Manual page 80

Access Point Configuration
Configuring SNTP
5-22
Enable Daylight Saving: The access point provides a way to automati-
■
cally adjust the system clock for Daylight Saving Time (DST) changes. To
use this feature you define the month and date to begin and to end the
change from standard time. During this period the system clock is set back
by one hour.
To Set SNTP Parameters:
1. Select the Administration tab.
2. Click the [
System Servers]
3. For SNTP Server, select Enable.
For the primary time server, type the IP address in the Primary Server field.
4.
5. For the secondary time server, type the IP address in the Secondary Server
field.
From the Enter Time Zone drop-down menu, select the time appropriate for
6.
your region.
(Optional) If your region uses Daylight Saving Time, check the Enable
7.
Daylight Saving check box and then select the dates to implement this
feature.
8. Click the
[Apply Changes]
button.
button.