Password; Ip Http Port - HP procurve 420 Management And Configuration Manual

Example
HP420(config)#username bob
HP420(config)#

password

After initially logging onto the system, you should set the password.
Remember to record it in a safe place. Use the no form to reset the default
password.
Syntax
password <password>
no password
password - Password for management access.
(Length: 3-16 characters, case sensitive)
Default Setting
None
Command Mode
Global Configuration
Example
HP420(config)#password hp420ap
HP420(config)#

ip http port

This command specifies the TCP port number used by the Web browser
interface. Use the no form to use the default port.
Syntax
ip http port <port-number>
no ip http port
port-number - The TCP port to be used by the browser interface.
(Range: 1024-65535)
Default Setting
80
Command Line Reference
System Management Commands
6-13