Cli: Configuring Mac Address Authentication - HP procurve 420 Management And Configuration Manual

CLI: Configuring MAC Address Authentication

CLI Commands Used in This Section
Command Syntax
mac-authentication server [local | remote]
address filter default <allowed | denied>
address filter entry <mac-address> <allowed | denied> page 6-43
address filter delete <mac-address>
mac-authentication session-timeout <seconds>
show authentication
The following example shows how to configure MAC address authentication
using the access point's local database. The example shows three client MAC
addresses that are permitted to access the network. All other MAC addresses
are denied access.
HP420(config)#mac-authentication server local
HP420(config)#address filter default denied
HP420(config)#address filter entry 00-70-50-cc-99-1a allowed
HP420(config)#address filter entry 00-70-23-7a-1c-bb allowed
HP420(config)#address filter entry 00-70-51-49-d3-26 allowed
HP420(config)#
The following example shows how to delete a MAC address from the access
point's local database.
HP420(config)#address filter delete 00-70-50-cc-99-1a
HP420(config)#
Access Point Configuration
Configuring Wireless Security
CLI Reference Page
page 6-45
page 6-43
page 6-44
page 6-45
page 6-46
5-65