Command
Function
radius-server
Sets the number of retries
retransmit
radius-server
Sets the interval between sending authentication
timeout
requests
show radius
Shows the current RADIUS settings
radius-server address
This command specifies the primary and secondary RADIUS servers.
Syntax
radius-server address [secondary] <host_ip_address | host_name>
secondary - Secondary server.
•
host_ip_address - IP address of server.
•
•
host_name - Host name of server. (Range: 1-20 characters)
Default Setting
None
Command Mode
Global Configuration
Example
HP420(config)#radius-server address 192.168.1.25
HP420(config)#
radius-server port
This command sets the RADIUS server network port.
Syntax
radius-server [secondary] port <port_number>
secondary - Secondary server.
•
port_number - RADIUS server UDP port used for authentication
•
messages. (Range: 1024-65535)
Command Line Reference
RADIUS Client
Mode Page
GC
6-36
GC
6-37
Exec
6-38
6-35