Delete; Dir - HP procurve 420 Management And Configuration Manual

C a u t i o n

delete

This command deletes a software or configuration file.
Syntax
delete filename
filename - Name of the configuration or software file.
Default Setting
None
Command Mode
Exec
Beware of deleting software files from flash memory. At least one software
file is required in order to boot the access point. If there are multiple software
files in flash memory, and the one used to boot the access point is deleted, be
sure you first use the bootfile command to update the software file booted at
startup before you reboot the access point. See"Downloading Access Point
Software" on page A-3 for more information.
Example
This example shows how to delete the test.cfg configuration file from flash
memory.
HP420#delete test.cfg
Are you sure you wish to delete this file? <y/n>:
HP420#
Related Commands
bootfile (page 6-31)
dir (page 6-33)

dir

This command displays a list of files in flash memory.
Command Mode
Exec
Command Line Reference
Flash/File Commands
6-33