Logging On; Logging Host - HP procurve 420 Management And Configuration Manual

logging on

This command controls logging of error messages, i.e., sending debug or error
messages to memory. The no form disables the logging process.
Syntax
logging on
no logging
Default Setting
None
Command Mode
Global Configuration
Command Usage
The logging process controls error messages saved to memory. You can
use the logging level command to control the type of error messages that
are stored in memory.
Example
HP420(config)#logging on
HP420(config)#

logging host

This command specifies a Syslog server host that will receive logging
messages. Use the no form to remove Syslog server host.
Syntax
logging host <host-name | host-ip-address>
no logging host
host-name - The name of a Syslog server. (Range: 1-20 characters)
•
• host-ip-address - The IP address of a Syslog server.
Default Setting
None
Command Mode
Global Configuration
Command Line Reference
System Management Commands
6-15