Antenna-Mode; Description - HP procurve 420 Management And Configuration Manual

antenna-mode

This command sets the antenna mode for the access point.
Syntax
antenna-mode <diversity | single>
• diversity - A diversity antenna system includes two identical antenna
elements that are both used to transmit and receive radio signals. The
access point's antennas are diversity antennas. External diversity
antennas have two pigtail connections to the access point.
single - Non-diversity antennas with one antenna element that have
•
only a single pigtail cable connection to the access point.
Default Setting
Diversity
Command Mode
Interface Configuration (Wireless)
Example
HP420(if-wireless g)#antenna-mode single
HP420(if-wireless g)#

description

This command adds a description to the wireless interface. Use the no form
to remove the description. The wireless interface description is displayed
when using the show interface wireless g command from the Exec level.
Syntax
description <string>
no description
string - Comment or a description for this interface.
(Range: 1-80 characters)
Default Setting
Enterprise 802.11g Access Point
Command Mode
Interface Configuration (Wireless)
Command Line Reference
Interface Commands
6-59