Getting Started; Introduction; Conventions; Command Syntax Statements - HP procurve 420 Management And Configuration Manual

Getting Started

Introduction

1-2

Introduction

This Management and Configuration Guide is intended to support the
following access points:
HP ProCurve Wireless Access Point 420 na
■
■ HP ProCurve Wireless Access Point 420 ww
This guide describes how to use the command line interface (CLI) and web
browser interface to configure, manage, and monitor access point operation.
A troubleshooting chapter is also included.
For information on other product documentation for this access point, refer
to "Related Publications" on page 1-4.
The Product Documentation CD-ROM shipped with the access point includes
a copy of this guide. You can also download a copy from the HP ProCurve
website, http://www.hp.com/go/hpprocurve. (See "Getting Documentation From
the Web" on page 1-5.)

Conventions

This guide uses the following conventions for command syntax and displayed
information.

Command Syntax Statements

Syntax: radius-server address [secondary] <host_ip_address | host_name>
■ Vertical bars ( | ) separate alternative, mutually exclusive elements.
Square brackets ( [ ] ) indicate optional elements.
■
Braces ( < > ) enclose required elements.
■
■ Braces within square brackets ( [ < > ] ) indicate a required element
within an optional choice.
■ Boldface indicates use of a CLI command, part of a CLI command
syntax, or other displayed element in general text. For example:
"Use the copy tftp command to download the key from a TFTP server."