HP procurve 420 Management And Configuration Manual page 126

Access Point Configuration
Configuring Wireless Security
Figure 5-14. The Authentication Window 802.1x Setup
5-68
Select the Security tab.
5.
6. Click the [
Shared Key Setup]
Set the Authentication Type Setup to Open System.
7.
8. Click the
[Apply Changes]
9. Click the [ Authentication]
10. Under 802.1x Setup, select Required.
11. For the Broadcast Key Refresh Rate, enter a time period between 0
(disabled) and 1440 minutes.
12. For the Session Key Refresh Rate, enter a time period between 0 (disabled)
and 1440 minutes.
13. For the 802.1x Re-Authentication Refresh Rate, enter a time period between
0 (disabled) and 65535 seconds.
14. Click the
[Apply Changes]
button.
button.
button.
button.