Radius-Server Timeout - HP procurve 420 Management And Configuration Manual

number_of_retries - Number of times the access point will try to
•
authenticate logon access via the RADIUS server. (Range: 1 - 30)
Default Setting
3
Command Mode
Global Configuration
Example
HP420(config)#radius-server retransmit 5
HP420(config)#

radius-server timeout

This command sets the interval between transmitting authentication requests
to the RADIUS server.
Syntax
radius-server [secondary] timeout <number_of_seconds>
secondary - Secondary server.
•
number_of_seconds - Number of seconds the access point waits for a
•
reply before resending a request. (Range: 1-60)
Default Setting
5
Command Mode
Global Configuration
Example
HP420(config)#radius-server timeout 10
HP420(config)#
Command Line Reference
RADIUS Client
6-37