Prompt - HP procurve 420 Management And Configuration Manual

Command Mode
Exec
Command Usage
• The access point's Country Code must be set before the radio can be
enabled.
• The available Country Code settings can be displayed by using the
country ? command.
• The Country Codes US (United States) and CA (Canada) are effec-
tively the same setting and are both implemented as NA (North
America).
• After a Country Code has been set the country command is no longer
available from the CLI. If you need to change the Country Code, the
access point configuration must be reset to its default values by using
the reset configuration command, or by pressing the reset button for
more than five seconds.
Example
HP420#country us
HP420#

prompt

This command customizes the CLI prompt. Use the no form to restore the
default prompt.
Syntax
prompt <string>
no prompt
string - Any alphanumeric string to use for the CLI prompt.
(Maximum length: 255 characters)
Default Setting
HP ProCurve Access Point 420
Command Mode
Global Configuration
Command Line Reference
System Management Commands
6-11