HP procurve 420 Management And Configuration Manual page 108

Access Point Configuration
Modifying Radio Settings
5-50
You can use the show command to display the current radio settings from the
wireless interface configuration level.
HP420(if-wireless g)#show
Wireless Interface Information
===========================================================
----------------Identification-----------------------------
Description
SSID
Radio mode
Channel
Status
----------------802.11 Parameters--------------------------
Transmit Power
Max Station Data Rate
Multicast Data Rate
Fragmentation Threshold
RTS Threshold
Beacon Interval
DTIM Interval
Maximum Association
----------------Security-----------------------------------
Closed System
WPA mode
Multicast cipher
Unicast cipher
WPA clients
Authentication Type
Encryption
Default Transmit Key
WEP Key Data Type
Static Keys :
Key 1: EMPTY Key 2: EMPTY
----------------Antenna-----------------------------------
Antenna mode
Antenna gain attenuation
Low channel
Mid channel
High channel
===========================================================
HP420#
: Enterprise 802.11g Access Point
: Enterprise Wireless AP
: 802.11b + 802.11g
: 9
: Enabled
: HALF (18 dBm)
: 24Mbps
: 2Mbps
: 1024 bytes
: 2000 bytes
: 60 TUs
: 8 beacons
: 64 stations
: DISABLED
: Dynamic key
: WEP
: TKIP
: SUPPORTED
: OPEN
: DISABLED
: 1
: Hexadecimal
Key 3: EMPTY Key 4: EMPTY
: Diversity
: 40%
: 79%
: 40%