Shutdown - HP procurve 420 Management And Configuration Manual

type - Input format. (Options: ASCII, HEX)
•
value - The key string.
•
For ASCII input, type a string between 8 and 63 alphanumeric
–
characters.
For HEX input, type exactly 64 hexadecimal digits.
–
Command Mode
Interface Configuration (Wireless)
Command Usage
• To support Wi-Fi Protected Access (WPA) for client authentication,
use the wpa-clients command to specify that WPA is required, use the
wpa-mode command to specify the pre-shared key mode, and use this
command to configure one static key.
• If WPA is used in pre-shared key mode, all wireless clients must be
configured with the same pre-shared key to communicate with the
access point.
Example
HP420(if-wireless g)#wpa-preshared-key ASCII agoodsecret
HP420(if-wireless g)#
Related Commands
wpa-clients (page 6-74)
wpa-mode (page 6-75)

shutdown

This command disables the wireless interface. Use the no form to enable the
interface.
Syntax
shutdown
no shutdown
Default Setting
Interface enabled
Command Mode
Interface Configuration (Wireless)
Command Line Reference
Interface Commands
6-77