Sntp-Server Ip - HP procurve 420 Management And Configuration Manual

sntp-server ip

This command sets the IP address of the servers to which SNTP time requests
are issued. Use this command with no arguments to clear all time servers from
the current list.
Syntax
sntp-server ip <1 | 2> <ip>
• 1 - First time server.
2 - Second time server.
•
ip - IP address of a time server (NTP or SNTP).
•
Default Setting
137.92.140.80
192.43.244.18
Command Mode
Global Configuration
Command Usage
When SNTP client mode is enabled using the sntp-server enable command,
the sntp-server ip command specifies the time servers from which the
access point polls for time updates. The access point will poll the time
servers in the order specified until a response is received.
Example
HP420(config)#sntp-server ip 10.1.0.19
HP420#
Related Commands
sntp server enable (page 6-20)
show sntp (page 6-23)
Command Line Reference
System Management Commands
6-19