Web: Setting Logging Parameters - HP procurve 420 Management And Configuration Manual

Access Point Configuration
Enabling System Logging
5-18

Web: Setting Logging Parameters

The System Servers window on the Administration tab enables system logs and
Syslog server details to be configured for the access point.
The web interface enables you to modify these parameters:
■ System Log Setup: Enables the logging of error messages.
Logging Host: Enables the sending of log messages to a Syslog server
■
host.
Server Name/IP: The IP address or name of a Syslog server.
■
■ Logging Console: Enables the logging of error messages to the console.
■ Logging Level: Sets the minimum severity level for event logging
To Enable Logging:
Select the Administration tab.
1.
2. Click the [
System Servers]
For System Log Setup, select Enable.
3.
4. For Logging Level, select the minimum severity level to be logged.
5. (Optional) If you want to send log messages to a Syslog server, perform
these steps:
a. Set Logging Host to Enable.
b. In the Server Name/IP field, type the IP address or name of a Syslog
server.
6. (Optional) If you want to send log messages to the console, set Logging
Console to Enable.
7. Click the [Apply Changes]
button.
button.