Ptz Settings; Preset; Cruise - Planet ICA-HM620 User Manual

Planet ica-hm620 2 mega-pixel poe plus speed dome internet camera

Hide thumbs Also See for ICA-HM620:

Table of Contents

4.5 PTZ Settings

Under the tab <PTZ>, there are categories including: <Preset>, <Cruise>, <Auto

Pan>, <Sequence>, <Home>, <Tilt Range>, <Camera- Exposure>, <Camera- WB>,

<Camera- Misc1>, <Camera- Misc2>, and <Camera- Default>.

The Preset Programming can be found under this path: PTZ> Preset.

Totally 256 Preset Points can be programmed for the Speed Dome IP Camera. Please refer to the

instructions below to set a Preset Point.

Preset Setting

To setup a Preset Point, please first move the cursor to the live view pane. Then left click and drag the

red pointer with PTZ controls to a desired position and adjust the fine zoom/ focus ratio. Subsequently,

assign a number for the current position from the drop-down Number List, and enter its descriptive

name. Click on the button <Set> to save the settings mentioned above.

Preset Go

To have the camera move to a specified Preset position, please select the Preset Point from the

drop-down Presetlist. Then the camera shall readily move to the target position.

The Cruise Programming can be found under this path: PTZ> Cruise.

The Speed Dome IP Camera supports up to eight Cruise Paths. Please follow the instructions below for

Cruise Path setup.

- 85 -

Table of Contents