1. Manuals
  2. Brands
  3. Planet Manuals
  4. Security Camera
  5. ICA-3480
  6. User manual

Planet ICA-3480 User Manual

Hide thumbs Also See for ICA-3480:
Table of Contents

Advertisement

Quick Links

Download this manual
User's Manual of ICA-3480/ICA-4480/ICA-3480F/ICA-4480F/ICA-M3580P/ICA-M4580P
H.265+ 4MP Smart IR IP Camera
ICA-3480 / ICA-4480
H.265+ 4MP Full Color IP Camera
ICA-3480F / ICA-4480F
H.265 5 Mega-pixel Smart IR IP Camera
with Remote Focus and Zoom
ICA-M3580P / ICA-M4580P
1

Advertisement

Table of Contents
loading

Related Manuals for Planet ICA-3480

Summary of Contents for Planet ICA-3480

  • Page 1 User’s Manual of ICA-3480/ICA-4480/ICA-3480F/ICA-4480F/ICA-M3580P/ICA-M4580P H.265+ 4MP Smart IR IP Camera ICA-3480 / ICA-4480 H.265+ 4MP Full Color IP Camera ICA-3480F / ICA-4480F H.265 5 Mega-pixel Smart IR IP Camera with Remote Focus and Zoom ICA-M3580P / ICA-M4580P...
  • Page 2 User’s Manual of ICA-3480/ICA-4480/ICA-3480F/ICA-4480F/ICA-M3580P/ICA-M4580P Copyright Copyright  2023 by PLANET Technology Corp. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, electronic, mechanical, magnetic, optical, chemical, manual or otherwise, without the prior written permission of PLANET.
  • Page 3 Do not dispose of WEEE as unsorted municipal waste and have to collect such WEEE separately. Revision User’s Manual of PLANET H.265(+) IP Camera Model: ICA-3480/ICA-4480/ICA-3480F/ICA-4480F/ICA-M3580P/ICA-M4580P Rev: 1.1 (July, 2023) Part No. EM-ICA-x80_series_v1.1...
  • Page 4 User’s Manual of ICA-3480/ICA-4480/ICA-3480F/ICA-4480F/ICA-M3580P/ICA-M4580P Legal Disclaimer  Should any reasons below cause the product destroyed or service stop, we will assume no responsibility for your or third party’s personal injury and property loss: ① No installation or use according to instruction strictly. ② For sake of state-building maintenance or public interest.
  • Page 5 User’s Manual of ICA-3480/ICA-4480/ICA-3480F/ICA-4480F/ICA-M3580P/ICA-M4580P Cautions  Make sure the power supply voltage is correct before using the camera.  Do not drop objects onto the device or vibrate the device vigorously, and keep the device away from locations where magnetic interference is present. Avoid installing the device where the surface is vibrating or subject to shock (ignoring this may damage the device).

  • Page 6: Table Of Contents

    User’s Manual of ICA-3480/ICA-4480/ICA-3480F/ICA-4480F/ICA-M3580P/ICA-M4580P Table of Contents CHAPTER 1 PRODUCT INTRODUCTION ....................8 1.1 PRODUCT HIGHLIGHTS ........................8 1.2 PRODUCT FEATURES ........................9 CHAPTER 2 OPERATING INSTRUCTIONS ....................10 2.1 NETWORK CONNECTION ......................10 2.1.1 W ......................10 IRED NETWORK CONNECTION 2.2 DETECTING AND CHANGING THE IP ADDRESS ................
  • Page 7 User’s Manual of ICA-3480/ICA-4480/ICA-3480F/ICA-4480F/ICA-M3580P/ICA-M4580P 8.3.3 E ............................. 49 MAIL 8.4 VIDEO ............................50 8.4.1 V ............................. 50 IDEO 8.4.2 A ............................51 UDIO 8.5 IMAGE ............................52 8.5.1 I ............................52 MAGE 8.5.2 OSD ............................... 57 8.6 EVENTS ............................58 8.6.1 O...

  • Page 8: Chapter 1 Product Introduction

    Chapter 1 Product Introduction 1.1 Product Highlights PLANET ICA-x80 IP camera series features video and audio acquisition, intelligent coding, network transmission and other functions. It uses embedded operating system and high-performance hardware processing platform, with high stability and reliability to meet the diverse needs of the industry.

  • Page 9: Product Features

    The IP camera supports the cloud-based storage function, which can store the device's all-day recording on the cloud server and the motion detection alarm information on the cloud server  The above product features mentioned are only for PLANET ICA-x80 series IP camera only.

  • Page 10: Chapter 2 Operating Instructions

    User’s Manual of ICA-3480/ICA-4480/ICA-3480F/ICA-4480F/ICA-M3580P/ICA-M4580P Chapter 2 Operating Instructions 2.1 Network Connection After the IP camera series is installed, you can preview and configure the . 2.1.1 Wired network connection Before configuring the IP camera, make sure that the IP camera is connected to the computer and that you can access the IP camera you want to set up.

  • Page 11: Detecting And Changing The Ip Address

     In the PLANET IP search tool, select the device to directly modify the IP, found on the right side of the interface by entering the password, and then click "Modify". Step 3：Open the browser to enter the IP address of the camera as the web login screen appears.

  • Page 12: Chapter 3 Access To The Ip Camera By Pvms Software

    Chapter 3 Access to the IP Camera by PVMS Software The PVMS software is available on the company website (www.planet.com.tw). You can use this software to view live video and manage IP camera. Follow the installation prompts to install the software. The control panel and real-time view interface of the PVMS software are shown in Figure 3-1.

  • Page 13: Chapter 4 Access To The Ip Camera By Web Client

    User’s Manual of ICA-3480/ICA-4480/ICA-3480F/ICA-4480F/ICA-M3580P/ICA-M4580P Chapter 4 Access to the IP Camera by Web Client 4.1 Preparation before installing plugin Make sure all the hardware connections and power equipment are normal before switching on the computer and running a ping for the IP address of the IP camera (Note: The IP address of the IP Camera in LAN must be unique.), such as 192.168.0.20.

  • Page 14: Changing Password

    User’s Manual of ICA-3480/ICA-4480/ICA-3480F/ICA-4480F/ICA-M3580P/ICA-M4580P 4.2.2 Changing password After the successful login, the interface prompts to change the password, as shown in Figure 4-2: Figure 4-2 For the account security, click "Modify" and enter the user interface to modify the password, as...
  • Page 15 User’s Manual of ICA-3480/ICA-4480/ICA-3480F/ICA-4480F/ICA-M3580P/ICA-M4580P To change your password, follow these steps: Step 1: Enter the old password and enter the new password in the Password and Confirm Password fields; Step 2: Set security questions 1, 2, and 3 and enter the answers.

  • Page 16: Forget Password

    User’s Manual of ICA-3480/ICA-4480/ICA-3480F/ICA-4480F/ICA-M3580P/ICA-M4580P 4.2.3 Forget password When you forget your password, you can reset the password in two ways: security question verification and security key verification. Security question verification Step 1: On the login interface, click "Forget". Step 2: Select the verification method as "Security question validation" (as shown in Figure 4-4 ①), enter the answers to security questions 1, 2, and 3, and click "Next".
  • Page 17 User’s Manual of ICA-3480/ICA-4480/ICA-3480F/ICA-4480F/ICA-M3580P/ICA-M4580P Step 3: Enter the new password and confirm the password (as shown in Figure 4-4 ②), and click "Next". Figure 4-4 ② Step 4: Click "Re-login" to return to the login interface (as shown in Figure 4-4 ③).
  • Page 18 User’s Manual of ICA-3480/ICA-4480/ICA-3480F/ICA-4480F/ICA-M3580P/ICA-M4580P Security Key verification Step 1: On the login interface, click "Forget". Step 2: Select the verification method as "Security Key Verification" (as shown in Figure 4-5 ①), and click "Import" to import the key file when the password is modified;...

  • Page 19: Exit System

    User’s Manual of ICA-3480/ICA-4480/ICA-3480F/ICA-4480F/ICA-M3580P/ICA-M4580P Step 4: Click "Re-login" to return to the login interface (as shown in Figure 4-5 ③). Figure 4-5 ③  When selecting "Security question validation", enter the correct answers to 2 questions to enter the "Set New Password" interface and proceed to the next step.

  • Page 20: Installing The Lsipcplugin Controls

    User’s Manual of ICA-3480/ICA-4480/ICA-3480F/ICA-4480F/ICA-M3580P/ICA-M4580P 4.3 Installing the LsIPCPlugin Controls  If you use the browser for the first time to access the web page, you’ll need to download and install the controls after login. Open a browser and log in to IP camera to enter the download interface, as shown in Figure 4-6.
  • Page 21 User’s Manual of ICA-3480/ICA-4480/ICA-3480F/ICA-4480F/ICA-M3580P/ICA-M4580P Figure 4-7 ② Figure 4-7 ③...
  • Page 22 User’s Manual of ICA-3480/ICA-4480/ICA-3480F/ICA-4480F/ICA-M3580P/ICA-M4580P Figure 4-7 ④ Figure 4-7 ⑤...
  • Page 23 User’s Manual of ICA-3480/ICA-4480/ICA-3480F/ICA-4480F/ICA-M3580P/ICA-M4580P Figure 4-7 ⑥ If the system prompts "installation failure", please uncheck the "cancel protection mode" in the setting safety of "Internet options" and enter the "custom level" ActiveX control Settings as shown in Figure 4-8, and reinstall LsIPCPlugin after save settings.

  • Page 24: Main Interface Description

    4.4 Main interface description In the IP camera main interface, you can preview real-time video in Live View, Config, Maintenance and other functions as shown in Figure 4-9 ① for ICA-3480/ICA-4480/ICA-3480F/ICA-4480F and Figure 4-9 ② for ICA-M3580P/ICA-M4580P. Figure 4-9 ① Figure 4-9 ②...

  • Page 25: Chapter 5 Live Preview

    User’s Manual of ICA-3480/ICA-4480/ICA-3480F/ICA-4480F/ICA-M3580P/ICA-M4580P Chapter 5 Live Preview 5.1 Live View Click " " to enter the IP camera preview interface, as shown in Figure 5-1: Figure 5-1 【switching window size】In the real-time preview interface on the bottom left of the preview ratio option, click "4: 3", "16: 9", "1:1", "full screen"...

  • Page 26: Image Config

    User’s Manual of ICA-3480/ICA-4480/ICA-3480F/ICA-4480F/ICA-M3580P/ICA-M4580P 5.2 Image Config Click " " on the right side of the window to display the Image Config interface. Click " " to hide the Image Config interface, where you can adjust the related image parameters such as brightness, contrast, saturation, sharpness and so on, as shown in Figure 5-2.

  • Page 27: Ptz

    User’s Manual of ICA-3480/ICA-4480/ICA-3480F/ICA-4480F/ICA-M3580P/ICA-M4580P 5.3 PTZ PTZ function is for ICA-M3580P and ICA-M4580P only. Click " " on the right side of the window to display the PTZ interface. Click " " to hide the Image PTZ interface, where you can adjust the related PTZ parameters such as Zoom, Focus(auto), Iris(fixed), One Key Focus, Humanoid tracking(no support), Init Camera, as shown in Figure 5-3.

  • Page 28: Chapter 6 Playback

    User’s Manual of ICA-3480/ICA-4480/ICA-3480F/ICA-4480F/ICA-M3580P/ICA-M4580P Chapter 6 Playback Playback function is for ICA-M3580P and ICA-M4580P only. In the main interface, click ”into the video playback interface. Playback interface can be stored in the camera “ SD card within the video file for query, playback and download operations as show in Figure...
  • Page 29 User’s Manual of ICA-3480/ICA-4480/ICA-3480F/ICA-4480F/ICA-M3580P/ICA-M4580P 【Capture】Video playback, click " " to capture the current playback screen image, the interface pops up the capture picture folder, which shows just captured the picture. 【Audio】If the video file has audio, click the " " audio button during playback to turn on and off the playback of the recorded file.

  • Page 30: Chapter 7 Picture Management

    User’s Manual of ICA-3480/ICA-4480/ICA-3480F/ICA-4480F/ICA-M3580P/ICA-M4580P Chapter 7 Picture Management Playback function is for ICA-M3580P and ICA-M4580P only. Click " " in the main interface to enter the Picture Management can query and download the picture files stored in the camera SD card, as shown in Figure 7-1.

  • Page 31: Chapter 8 Configuration

    User’s Manual of ICA-3480/ICA-4480/ICA-3480F/ICA-4480F/ICA-M3580P/ICA-M4580P Chapter 8 Configuration Click “ ” in the main interface to enter the local configuration interface. Here you can set the device system, network, video, images, events and other parameters. 8.1 Local Configuration In the main interface, click "Config  Local Config" to enter the local configuration interface, where you can set the "Record File Settings", "Picture and Clip...

  • Page 32: System

    User’s Manual of ICA-3480/ICA-4480/ICA-3480F/ICA-4480F/ICA-M3580P/ICA-M4580P 8.2 System In the main interface, click "Config  System" to enter the system configuration interface. The system consists of system configuration and security. 8.2.1 System Config In the main interface, click "Config  System  System Config" to enter the system configuration interface.
  • Page 33 User’s Manual of ICA-3480/ICA-4480/ICA-3480F/ICA-4480F/ICA-M3580P/ICA-M4580P 【Time Zone】Displays the current device selection time zone. 【NTP】The IP Camera time will synchronize with network, and you can change the different time zones. (This feature requires IP Camera network environment to be connected to the Internet.) Click on the "Apply"...

  • Page 34: Security

    User’s Manual of ICA-3480/ICA-4480/ICA-3480F/ICA-4480F/ICA-M3580P/ICA-M4580P 8.2.2 Security In the main interface, click "Config  System  Security" to enter the user management settings interface, where you can add, edit and delete the user, and you can also query the current user information in "Online User". The current user name for the administrator is "admin".
  • Page 35 User’s Manual of ICA-3480/ICA-4480/ICA-3480F/ICA-4480F/ICA-M3580P/ICA-M4580P Figure 8-5 Cautions  In order to improve the security of the product network, please change the password of the user name regularly. It is recommended to change it every 3 months. If the IP camera is used in a high security risk environment, it is recommended to update once a month or every week.
  • Page 36 User’s Manual of ICA-3480/ICA-4480/ICA-3480F/ICA-4480F/ICA-M3580P/ICA-M4580P  The admin user cannot be deleted and you can only change the admin password.  User permission description: Administrator -- all permissions. Operator -- All permissions (cannot make system security parameter settings). Viewer -- only preview permission.
  • Page 37 Step 1: Click to select the user you want to delete and click "Delete". Step 2: Click "Ok" on the pop-up dialogue box to delete the user. ⑥ Security Service (ICA-3480/ICA-4480 only) Step 1: Click "□" to enable "Illegal Login Lock".

  • Page 38: Network

    User’s Manual of ICA-3480/ICA-4480/ICA-3480F/ICA-4480F/ICA-M3580P/ICA-M4580P 8.3 Network In the main interface, click "Config  Network" to enter the network settings interface, the network is divided into Basic Config, P2P and Email configuration. 8.3.1 Basic Setup ① TCP/IP The TCP/IP interface is used to view and configure network parameters such as the camera's IP address.
  • Page 39 Make sure RTSP port (real-time transmission protocol port) is available for modification.  In ICA-3480/ICA-4480, the ONVIF port is set to match the HTTP port, the default value is 80. Modifying the HTTP port will automatically change the ONVIF port as well.
  • Page 40 "Apply", as shown in Figure 8-6 ③. Figure 8-6 ③ 【DDNS】Enable / disable DDNS function. 【DDNS Type】Choose PLANET DDNS or PLANET Easy DDNS. 【Domain Name】The input selection type must correspond to the successful domain name. 【DDNS User】The input selection type corresponds to the registered account.
  • Page 41 User’s Manual of ICA-3480/ICA-4480/ICA-3480F/ICA-4480F/ICA-M3580P/ICA-M4580P ③ PPPoE PPPoE(Point-to-Point Protocol over Ethernet) is one of the ways in which IPC devices access the network. After obtaining the PPPoE user name and password provided by the Internet Service Provider, you can establish a network connection through PPPoE dialup.
  • Page 42 User’s Manual of ICA-3480/ICA-4480/ICA-3480F/ICA-4480F/ICA-M3580P/ICA-M4580P ④ FTP Set the FTP (File Transfer Protocol) server and you can store the alarm icon to the FTP server. Precondition You need to purchase or download the FTP service tool and install the software on your PC.
  • Page 43 User’s Manual of ICA-3480/ICA-4480/ICA-3480F/ICA-4480F/ICA-M3580P/ICA-M4580P 【FTP Server】Fill in the FTP server address. 【Test】Enter the FTP server information and click "Test" to confirm the correctness of all input information and whether the device and server are connected properly. 【Port】Fill in the FTP server port number.
  • Page 44 User’s Manual of ICA-3480/ICA-4480/ICA-3480F/ICA-4480F/ICA-M3580P/ICA-M4580P ⑥ QoS In the main interface, click "Config  Network  Basic Setup  QoS" to enter the QoS interface, as shown in Figure 8-6 ⑦. Figure 8-6 ⑦ 【Video/Audio DSCP】 You can input the value manually to set the "Video/Audio DSCP".
  • Page 45 User’s Manual of ICA-3480/ICA-4480/ICA-3480F/ICA-4480F/ICA-M3580P/ICA-M4580P ⑦ 802.1X In the main interface, click "Config  Network  Basic Setup  802.1X" to enter the 802.1X interface, as shown in Figure 8-6 ⑧. Figure 8-6 ⑧ The steps to configure FTP are as follows: Step 1: Click "...

  • Page 46: P2P

    User’s Manual of ICA-3480/ICA-4480/ICA-3480F/ICA-4480F/ICA-M3580P/ICA-M4580P 8.3.2 P2P ① P2P P2P is a private network penetration technology. It does not need to apply for a dynamic domain name, perform port mapping, or deploy a transit server. You can directly scan the QR code to download a mobile client.
  • Page 47 User’s Manual of ICA-3480/ICA-4480/ICA-3480F/ICA-4480F/ICA-M3580P/ICA-M4580P Step 3: Add devices to the mobile client. After login, click "Device manage", click " ", select "SN Add", enter the device name, user name, password and verification code after scan the QR code, select group, click "Add Device".
  • Page 48 User’s Manual of ICA-3480/ICA-4480/ICA-3480F/ICA-4480F/ICA-M3580P/ICA-M4580P Step 2: Log in to IPEYE Client "http://192.168.0.20:8282", and enter the device username, password, IP camera user and password. Click “Confirm” when a device is added, as shown in Figure 8-7 ④. Figure 8-7 ④ Step 3: Log in to "https://www.ipeye.ru/" and enter the IPEYE device list to view the newly added device named as "cloud_xxxxx".

  • Page 49: Email

    User’s Manual of ICA-3480/ICA-4480/ICA-3480F/ICA-4480F/ICA-M3580P/ICA-M4580P 8.3.3 Email After setting the email information and enabling the alarm linkage email function, and when the IPC triggers an alarm, the system sends an alarm email to the user mailbox. The specific operation steps are as follows: Step 1: In the main interface, click "Config ...

  • Page 50: Video

    User’s Manual of ICA-3480/ICA-4480/ICA-3480F/ICA-4480F/ICA-M3580P/ICA-M4580P 8.4 Video In the main interface, click "Config  Video" to enter the video and audio configuration interface, where you can set the device video, audio and other functions. 8.4.1 Video In the main interface click "Config  Video  Video" into the video configuration interface,...

  • Page 51: Audio

    User’s Manual of ICA-3480/ICA-4480/ICA-3480F/ICA-4480F/ICA-M3580P/ICA-M4580P 8.4.2 Audio In the main interface, click "Config  Video  Audio" to enter the audio configuration interface, where you can set the device audio input mode. Select the audio code and set the input volume,...

  • Page 52: Image

    User’s Manual of ICA-3480/ICA-4480/ICA-3480F/ICA-4480F/ICA-M3580P/ICA-M4580P 8.5 Image In the main interface, click "Config  Image" to enter the image configuration interface, where you can set the device image and OSD text and other information. 8.5.1 Image In the main interface, click "Config  Image  Image" to enter the image configuration...
  • Page 53 Figure 8-13. Figure 8-13  In ICA-3480/ICA-4480, the "Anti Flicker" feature is available, allowing users to adjust the level from 1 to 10 to eliminate video flickering on the screen. The default setting is "OFF".
  • Page 54 User’s Manual of ICA-3480/ICA-4480/ICA-3480F/ICA-4480F/ICA-M3580P/ICA-M4580P - When the fill mode is "Day", the fill light of the device is always off, and the camera is in color mode. - When the mode is "Night", the device monitor video is added to the night effect.
  • Page 55 User’s Manual of ICA-3480/ICA-4480/ICA-3480F/ICA-4480F/ICA-M3580P/ICA-M4580P Manual white balance: It supports Red and Blue gain adjustments. You can adjust the range (0-255). 【Video Adjustment】Here you can turn on mirroring, corridor mode and set the video format, as shown in Figure 8-16. Figure 8-16 Mirror: The default is off.
  • Page 56 User’s Manual of ICA-3480/ICA-4480/ICA-3480F/ICA-4480F/ICA-M3580P/ICA-M4580P Wide Dynamic Range: The default is off. You can select Low, Middle or High from the drop-down menu. Digital Noise Reduction: The default is Mid. You can select Low, High or off from the drop-down menu.

  • Page 57: Osd

    User’s Manual of ICA-3480/ICA-4480/ICA-3480F/ICA-4480F/ICA-M3580P/ICA-M4580P 8.5.2 OSD The OSD is information displayed on the real-time monitoring screen. The name, date and day of the IPC can be displayed on the monitor screen. In the main interface, click "Config  Image  OSD" to enter the OSD configuration interface, where you can set the preview interface to display menu time, OSD text and other information, as shown in Figure 8-19.

  • Page 58: Events

    User’s Manual of ICA-3480/ICA-4480/ICA-3480F/ICA-4480F/ICA-M3580P/ICA-M4580P 8.6 Events In the main interface, click "Config  Events" to enter the event configuration interface, including common events and smart events. 8.6.1 Ordinary Event In the Ordinary event interface, you can set the device's Motion Detection, Privacy Mask, Video Tampering, Exception, ROI, and other events.
  • Page 59 User’s Manual of ICA-3480/ICA-4480/ICA-3480F/ICA-4480F/ICA-M3580P/ICA-M4580P Step 3: Select the area to set the motion detection sensitivity, click "Apply". 【Select All】 Motion detection range is to monitor all of the areas, which consist of 396 (22 x 18) small squares. 【Manually draw the alarm area】Move the mouse to the preview screen and click the left mouse button to select the range of motion detection.
  • Page 60 User’s Manual of ICA-3480/ICA-4480/ICA-3480F/ICA-4480F/ICA-M3580P/ICA-M4580P Step 5: Set the linkage method. General linkage includes "Upload Via SMTP", "Upload Via FTP", "Upload Via Cloud", "Sound Alarm". When the device motion detection alarms, it will inform the user as shown in Figure 8-22.
  • Page 61 User’s Manual of ICA-3480/ICA-4480/ICA-3480F/ICA-4480F/ICA-M3580P/ICA-M4580P ② Privacy Mask Privacy occlusion is a privacy protection feature that blocks the privacy of the surveillance screen from being viewed and recorded. In the main interface, click "Config  Event  Ordinary Events  Privacy Mask" to enter the privacy mask settings interface, as shown in Figure 8-23.
  • Page 62 User’s Manual of ICA-3480/ICA-4480/ICA-3480F/ICA-4480F/ICA-M3580P/ICA-M4580P ③ Video Tampering The Video Tampering function is used to detect whether a monitoring area is blocked by human factors and other factors during a certain period of time. When the area of the device is blocked, the IP camera will alarm according to the settings.
  • Page 63 User’s Manual of ICA-3480/ICA-4480/ICA-3480F/ICA-4480F/ICA-M3580P/ICA-M4580P 【Enable】Turn on / off device video tampering alarm. Step 2: Click "Enable" to turn on the Video Tampering function, click "Apply". Step 3: Set the arming schedule. As shown in Figure 8-25 below, you can view, edit, and delete the arming time of motion detection.
  • Page 64 User’s Manual of ICA-3480/ICA-4480/ICA-3480F/ICA-4480F/ICA-M3580P/ICA-M4580P Step 4: Set the linkage method. General linkage includes "Upload Via SMTP", "Upload Via FTP", "Upload Via Cloud". When the device motion detection alarms, it will inform the user as shown in Figure 8-26. Figure 8-26 Here to open the "General linkage", "Upload via FTP", "Upload via SMTP", "Upload via Cloud",...
  • Page 65 User’s Manual of ICA-3480/ICA-4480/ICA-3480F/ICA-4480F/ICA-M3580P/ICA-M4580P ④ Exception (ICA-M3580P/ICA-M4580P only) In the main interface, click "Configuration  Events  Ordinary Events  Exception" to enter the exception settings interface, as shown in Figure 8-27. Figure 8-27 Set the Exception Type to "Network Disconnected", "IP Address Conflicted" or "Full Disk"...
  • Page 66 User’s Manual of ICA-3480/ICA-4480/ICA-3480F/ICA-4480F/ICA-M3580P/ICA-M4580P ⑤ ROI ROI is the area of interest setting. Users can set the most concerned and most interested area in the video screen through this function. IPC will improve the video image quality of the corresponding area when video encoding, and reduce the encoding quality of other areas, so as to highlight the image effect in the selected area.
  • Page 67 User’s Manual of ICA-3480/ICA-4480/ICA-3480F/ICA-4480F/ICA-M3580P/ICA-M4580P ○ 6 Sound Alarm (ICA-M3580P/ICA-M4580P only) After configuring the sound alarm, when the event is triggered, the speaker on the device can be linked to alarm. The specific operation steps are as follows: Step 1: In the main interface, click "Configuration → Events → Ordinary Events →...

  • Page 68: Smart Event

    User’s Manual of ICA-3480/ICA-4480/ICA-3480F/ICA-4480F/ICA-M3580P/ICA-M4580P 8.6.2 Smart Event ① Intrusion Detection The area intrusion detection is used to detect whether a person enters the set area in the video setting area, and the alarm is linked according to the judgment result.
  • Page 69 User’s Manual of ICA-3480/ICA-4480/ICA-3480F/ICA-4480F/ICA-M3580P/ICA-M4580P Step 5: Set the arming schedule. As shown in Figure 8-31 below, you can view, edit, and delete the arming time of motion detection. The default is to arm the alarm 24 hours a day. You can adjust the arming time as...
  • Page 70 User’s Manual of ICA-3480/ICA-4480/ICA-3480F/ICA-4480F/ICA-M3580P/ICA-M4580P Step 6: Set the linkage method. General linkage includes "Upload Via SMTP", "Upload Via FTP", "Upload Via Cloud", "Sound Alarm". When the device motion detection alarms, it will inform the user as shown in Figure 8-32.
  • Page 71 User’s Manual of ICA-3480/ICA-4480/ICA-3480F/ICA-4480F/ICA-M3580P/ICA-M4580P ② Line Cross Detection (ICA-M3580P/ICA-M4580P only) The line cross detection function is used to detect whether there is an object in the video that crosses the set warning surface, and the alarm is linked according to the judgment result.
  • Page 72 User’s Manual of ICA-3480/ICA-4480/ICA-3480F/ICA-4480F/ICA-M3580P/ICA-M4580P 【Sensitivity】Used to set the sensitivity of detected area intrusion. The default is 50. Drag the progress bar or enter the value directly in the value box to modify the sensitivity. The greater the sensitivity, the easier it is to trigger an alarm.
  • Page 73 User’s Manual of ICA-3480/ICA-4480/ICA-3480F/ICA-4480F/ICA-M3580P/ICA-M4580P Step 6: Set the linkage method. General linkage includes "Upload Via SMTP", "Upload Via FTP", "Upload Via Cloud", "Sound Alarm". When the device motion detection alarms, it will inform the user as shown in Figure 8-35.
  • Page 74 User’s Manual of ICA-3480/ICA-4480/ICA-3480F/ICA-4480F/ICA-M3580P/ICA-M4580P The specific operation steps are as follows: Step 1: In the main interface click on the "Configuration → Events → Smart Event → Loiter Detection" to enter the Loiter Detection settings interface, as shown in Figure 8-36.
  • Page 75 User’s Manual of ICA-3480/ICA-4480/ICA-3480F/ICA-4480F/ICA-M3580P/ICA-M4580P Step 5: Set the arming schedule. As shown in Figure 8-37 below, you can view, edit, and delete the arming time of motion detection. The default is to arm the alarm 24 hours a day. You can adjust the arming time as...
  • Page 76 User’s Manual of ICA-3480/ICA-4480/ICA-3480F/ICA-4480F/ICA-M3580P/ICA-M4580P Step 6: Set the linkage method. General linkage includes "Upload Via SMTP", "Upload Via FTP", "Upload Via Cloud", "Sound Alarm". When the device motion detection alarms, it will inform the user as shown in Figure 8-38.
  • Page 77 User’s Manual of ICA-3480/ICA-4480/ICA-3480F/ICA-4480F/ICA-M3580P/ICA-M4580P ④ People Gather Detection (ICA-M3580P/ICA-M4580P only) The people gather detection function is used to detect that the density of the personnel in the set area exceeds the set threshold, and the alarm is linked according to the judgment result.
  • Page 78 User’s Manual of ICA-3480/ICA-4480/ICA-3480F/ICA-4480F/ICA-M3580P/ICA-M4580P Step 5: Set the arming schedule. As shown in Figure 8-40 below, you can view, edit, and delete the arming time of motion detection. The default is to arm the alarm 24 hours a day. You can adjust the arming time as...
  • Page 79 User’s Manual of ICA-3480/ICA-4480/ICA-3480F/ICA-4480F/ICA-M3580P/ICA-M4580P Step 6: Set the linkage method. General linkage includes "Upload Via SMTP", "Upload Via FTP", "Upload Via Cloud", "Sound Alarm". When the device motion detection alarms, it will inform the user as shown in Figure 8-41.
  • Page 80 User’s Manual of ICA-3480/ICA-4480/ICA-3480F/ICA-4480F/ICA-M3580P/ICA-M4580P ○ 5 Vehicle Detection (ICA-M3580P/ICA-M4580P only) The vehicle detection function is used to detect that the density of the vehicle in the set area exceeds the set threshold, and the alarm is linked according to the judgment result.
  • Page 81 User’s Manual of ICA-3480/ICA-4480/ICA-3480F/ICA-4480F/ICA-M3580P/ICA-M4580P Step 4: When you need to set other Warn Region, repeat step 3 to complete the setup. Step 5: Set the arming schedule. As shown in Figure 8-43 below, you can view, edit, and delete the arming time of motion detection.
  • Page 82 User’s Manual of ICA-3480/ICA-4480/ICA-3480F/ICA-4480F/ICA-M3580P/ICA-M4580P Step 6: Set the linkage method. General linkage includes "Upload Via SMTP", "Upload Via FTP", "Upload Via Cloud", "Sound Alarm". When the device motion detection alarms, it will inform the user as shown in Figure 8-44.

  • Page 83: Storage

    User’s Manual of ICA-3480/ICA-4480/ICA-3480F/ICA-4480F/ICA-M3580P/ICA-M4580P 8.7 Storage 8.7.1 Schedule Config (ICA-M3580P/ICA-M4580P only) ① Record Schedule The specific operation steps are as follows: Step 1: In the main interface, click "Configuration → Storage → Schedule Config → Record Schedule" to enter the recording setting interface, as shown in Figure 8-45 ①.
  • Page 84 User’s Manual of ICA-3480/ICA-4480/ICA-3480F/ICA-4480F/ICA-M3580P/ICA-M4580P Step 4: Set the Pre-recorded time and Video delay time，click the ”Advance parameters”, You can set the Pre-recorded time (Unlimited, 10s, 15s, 20s, 25s,30s) and Video delay (5s, 10s, 30s, 1min, 2min, 5min, 10min), as shown in Figure 8-45 ②.
  • Page 85 User’s Manual of ICA-3480/ICA-4480/ICA-3480F/ICA-4480F/ICA-M3580P/ICA-M4580P The specific operation steps are as follows: Step 1: In the main interface, click "Configuration → Storage → Schedule Configuration → Capture" to enter the capture parameter setting interface, as shown in Figure 8-46 ①. Figure 8-46 ①...
  • Page 86 User’s Manual of ICA-3480/ICA-4480/ICA-3480F/ICA-4480F/ICA-M3580P/ICA-M4580P Step 6: Select options such as image format (JPEG), resolution, and picture quality as required, and set up timed snapshots and event snapshots. 【Image Format】Support JPEG format. 【Resolution】The captured image resolution. 【Image Quality】Three levels of "Low", "Midd" and "High" can be selected.

  • Page 87: Storage Management

    User’s Manual of ICA-3480/ICA-4480/ICA-3480F/ICA-4480F/ICA-M3580P/ICA-M4580P 8.7.2 Storage Management ① Storage (ICA-M3580P/ICA-M4580P only) In the main interface, click "Configuration → Storage → Storage Management → Storage" to enter the storage management setting interface, where you can view the memory card capacity and status, and perform operations such as formatting and configuring the memory card, as shown in Figure 8-47 below.
  • Page 88 User’s Manual of ICA-3480/ICA-4480/ICA-3480F/ICA-4480F/ICA-M3580P/ICA-M4580P The specific operation steps are as follows: Step 1: In the main interface, click "Config  Storage  Storage Management  Cloud Storage" to enter the cloud storage configuration interface, as shown in Figure 8-48. Figure 8-48 Step 2: Select the cloud storage type, such as "Google".

  • Page 89: Chapter 9 Maintain

    User’s Manual of ICA-3480/ICA-4480/ICA-3480F/ICA-4480F/ICA-M3580P/ICA-M4580P Chapter 9 Maintain Click " " in the main interface to enter the System Configuration interface. Here you can check the Device Information and Log. You also can perform IPC upgradation, reset to default, auto maintain, and import and export device parameter.

  • Page 90: Default

    User’s Manual of ICA-3480/ICA-4480/ICA-3480F/ICA-4480F/ICA-M3580P/ICA-M4580P 9.3 Default In the main interface, click "Maintain  Default" to enter the device recovery default interface, where you can reset device parameters and reset all the parameters to the factory default, as shown in Figure 9-3.

  • Page 91: Import And Export

    User’s Manual of ICA-3480/ICA-4480/ICA-3480F/ICA-4480F/ICA-M3580P/ICA-M4580P 9.5 Import and Export In the main interface, click "Maintain  Import And Export" to enter the device parameters import and export interface, where you can export device parameters or import the parameters file to IPC, as shown in Figure 9-5.

  • Page 92: Chapter 10 Frequently Asked Questions

    User’s Manual of ICA-3480/ICA-4480/ICA-3480F/ICA-4480F/ICA-M3580P/ICA-M4580P Chapter 10 Frequently Asked Questions Features Answer: Please refer to the details as follows: a. The network is unreasonable sound? Solution: First you can connect network by PC, and check whether the network cable is good. And check whether the network between the camera and the PC is good.

This manual is also suitable for:

Ica-4480Ica-3480fIca-4480fIca-m3580pIca-m4580p

Table of Contents