Download
Share
Print this page
Planet ICA-230 User Manual
  1. Manuals
  2. Brands
  3. Planet Manuals
  4. Security Camera
  5. ICA-230
  6. User manual

Planet ICA-230 User Manual

Hide thumbs Also See for ICA-230:

Advertisement

Quick Links

Download this manual
Chapter 1. Introduction
Thank you for purchasing the Pan/Tilt Internet Camera. It is versatile and high image solution of
surveillance application for day and night. The Pan/Tilt Internet Camera is also a stand-alone
camera system with a built-in processor and web server that provides highest quality video and
system performance.

1.1 Before Installation

Before installation, please be sure to read this quick installation guide and user's manual (CD)
carefully to complete machine installation. This guide shows how to quick set up the three
cameras, unless model name specified terms "PT Internet Camera" will be used for these three
models.

1.2 System Requirements

Network Interface
Monitoring System
System Hardware

1.3 Package Content

PT Internet Camera x 1
Power Adapter x 1
Camera Mount Kit x 1
CD Disk x 1
Quick Installation Guide x 1
NOTE: If any of the above items are missing, please contact your dealer immediately.
10/100MBase-TX Ethernet
Recommended for Internet Explorer 6.0 or later
· CPU: Pentium 4, 3.0GHz or above
· Memory Size : 512 MB (512 MB or above Recommended )
· VGA card resolution : 1024 x 768 or above
· VGA card memory : 64 MB or above
· Network bandwidth: In VGA resolution mode, minimum
upload bandwidth is 1Mbps.
(at least 128 MB for Megs-pixel resolution)
2

Advertisement

loading

Related Manuals for Planet ICA-230

Summary of Contents for Planet ICA-230

  • Page 1: Before Installation

    Chapter 1. Introduction Thank you for purchasing the Pan/Tilt Internet Camera. It is versatile and high image solution of surveillance application for day and night. The Pan/Tilt Internet Camera is also a stand-alone camera system with a built-in processor and web server that provides highest quality video and system performance.
  • Page 2 Chapter 2. Physical Description 2.1 ICA-230/M230 2.1.1 Front Panel Lens & focus IR LEDs IR LEDs ring Microphone Power Wireless LED & LAN LED IR LEDs These LEDs are Infra-Red type. It’s very useful for low-lux environment to provide supplementary light source for image sensor.
  • Page 3 The LAN socket is compliant with IEEE802.3af standard PoE interface. NOTE If you need to connect the ICA-230/M230 to PC or notebook directly, you should use cross over cable instead. Factory Default This button is hidden in the pinhole. Please refer to the Appendix A in Reset manual for more information.
  • Page 4 2.2 ICA-501 2.2.1 Front Panel Lens & focus ring Microphon Power Wireless LED & LAN LED Lens & focus ring User could use this ring to adjust focus manually. Power & LAN LED This LED is used to indicate whether DC power is on or not. In addition, this LED will be flashing while network accessing via Ethernet.
  • Page 5 2.2.2 Rear Panel Factory Default DC Power Jack Audio Output Jack LAN Socket Audio Output Jack Audio-out Jack allows this device to output audio or alerting sound. DC Power Jack The input power is 12VDC. NOTE Only use the power adapter supplied with ICA-501. Otherwise, the product may be damaged.

  • Page 6: Ceiling Mount

    Chapter 3. Mounting the PT Internet Camera 3.1 Ceiling Mount 1. Fix the camera to L-type bracket with two supplied screws. 2. Fix the bracket and camera to the ceiling using two holly wall anchors and screws.
  • Page 7 3.2 Ceiling Mount 1. Fix the L-type bracket to the wall using two holly wall anchors and screws. 2. Fix the camera to L-type bracket with two supplied screws.

  • Page 8: Physical Installation

    NOTE: If there has a IEEE802.3af PoE switch in your network, you can connect the ICA-230/M230 LAN cable to this PoE switch to obtain power. The power adapter is unnecessary when ICA-230/M230 is connected to a PoE switch. 2. Check the LED (Front Panel) The LED is defined to identify LAN connection type.
  • Page 9 NOTE: In the installation steps below, this guide use ICA-M230 as the example. However, the steps for ICA-501 & ICA-230 are similar. 1. Insert the bundled CD into the CD-ROM drive to launch the autorun program. Once completed, a welcome menu screen will appear.
  • Page 10 4. Please click “Next” to install with original settings, or you may click “Change…” button to modify the install folder then press “Next” to continue. 5. Please click “Install” to start the installation.
  • Page 11 6. Please click “Finish” to complete the installation Please double-click the utility icon on the desktop then you will see the PT Internet Camera utility. Press “Search” button. IP Wizard will list all IP Cameras in your LAN environment:...
  • Page 12 4.2 Wizard function NOTE: Please select your PT Internet Camera and press “Wizard”. The utility featured of “Wizard” function to help user to initial PT Internet Camera. User can setup IP address, username and password step by step. Please enter User Name and Password. Default Username is: admin, leave password blank. Then click “Submit”.
  • Page 13 4.3 Username and Password You may change the ID and assign a new password to your PT Internet Camera or keep the original and press “Next” to continue. As below, you can select “Static IP” and enter the IP settings. Or select “DHCP ON” when there is a DHCP server in your network.
  • Page 14 Chapter 5. Cam Viewer Installation This chapter will guide you to install the central management software. The PT Internet Camera can be managed through its web interface. However, to central control, manage or record the cameras installed in the network Cam Viewer, the windows-based central management software are required.
  • Page 15 3. The “Welcome to the InstallShield Wizard for Planet Cam Viewer Lite 1.0.9” will display on the screen, please click “Next”. 4. Please read the license agreement and then check “I accept the terms of the license agreement” if you are agreed and click “Next” to continue.
  • Page 16 5. Please key-in user name and company name for which you want and click “Next” to continue. 6. Check the option “Complete – all program features will be installed (Requires the most disk space)” and click “Next”.
  • Page 17 7. “Ready to Install the Program” will appear to prompt you to start the installation. Please click “Install” to start. 8. Please click “No” to finish the Cam Viewer Lite installation. NOTE: In above step, when Cam Viewer works with MBM5 (Motherboard Monitor 5), Cam Viewer will display CPU temperature and fan speed.
  • Page 18 Appendix A: Feature Listing for Cam Viewer Cam Viewer Pro Cam Viewer Pro Product Cam Viewer Lite Single-Brand Multi-Brand Main Console 4 / 8 / 16 / 32 / 64 4 / 8 / 16 / 25 / 32 / 64 IP Cameras Input(s) 32 Channels Channels...
  • Page 19 Concurrent Playback 1 Channel 16 Channels 16 Channels General Motion; General Motion; Missing Object; Missing Object; Signal Lost; Signal Lost; Smart Search General Motion Foreign Object; Foreign Object; Lose Focus; Lose Focus; Camera Occlusion Camera Occlusion Visibility; Sharpen; Visibility; Sharpen; Visibility;...
  • Page 20 Appendix B: Suggest Hardware / System Requirement Total FPS ~600 600~480 480~240 240~120 120~ Intel Core 2 Intel Core 2 Intel Pentium Intel P4 3.0 Intel P4 2.8 Duo QX6800 Duo E6600 D 930 4 GB 2 GB 2 GB 1 GB 1 GB Chipset of...

This manual is also suitable for:

Ica-m230Ica-501