Table of Contents
Advertisement
Web Admin User Manual
To see existing users, click Select User ID, and select a user to be edited. Then change the
password, name, or access permission, and click Apply button to save the setting. Setup of
Access Permission can be done the same way as in Add section.
3.5.3. Delete
To delete an existing user, select Delete.
From the list of the users, select a user to delete. Click Delete button to confirm the deletion.
4.
Network Configuration
Configuration the network is dependent on how an IP address is assigned in Ethernet-based
environment, which is static IP, dynamic IP (DHCP), or PPPoE. For wireless LAN, additional
configuration is necessary to have a connection with wireless AP.
In the case of wireless models, users have to choose between wired or wireless connection. In
other words, both connections can't be used at the same time. The way how to choose one of
them is whether wired LAN cable is plugged into the product. When LAN cable is plugged in
for longer than 5 seconds, the wired LAN is activated for data transmission. If LAN cable is
unplugged more than 5secconds, wireless LAN is activated instead. If PPPoE is selected by user,
wired LAN will be activated regardless of condition of LAN cable. For network configuration,
select Network configuration from Admin page.
- 17 -
Advertisement
Table of Contents
