Rep 11.6 Mailbox Drive Belts - Xerox Phaser 4620 Service Manual

REP 11.6 Mailbox Drive Belts

Parts List on PL 11.20 Item 5
Removal
Switch off the electricity to the machine. Disconnect the power cord from the customer
supply while performing tasks that do not need electricity. Electricity can cause death or
injury. Moving parts can cause injury.
1. Remove the Mailbox Output Trays,
2. Separate the Mailbox from the printer,
3. Remove the right cover, REP 11.3.
4. Remove the Control Board, REP 11.5.
5. Remove 3 (plastic) screws that secure the mounting bracket,
Figure 1 Remove the mounting bracket
6. Remove 2 screws (plastic) that secure the Control Board bracket to the Mailbox.
Repairs
REP 11.6
WARNING
REP 11.1.
GP 14.
Figure 1.
Figure 2 Remove the Control Board bracket
NOTE: If the primary drive belt is being replaced, remove the Transport Motor.
7. Remove the damaged belt, Figure
5/2011
4-120
3.
Revision - Xerox Internal Use Only
Phaser 4600/4620 Printer Service Manual