REP 9.8 Joint Board
Parts List on
PL 9.15 Item 7
Removal
Switch off the electricity to the machine. Disconnect the power cord from the customer
supply while performing tasks that do not need electricity. Electricity can cause death or
injury. Moving parts can cause injury.
1.
Remove the Duplex Unit,
REP
10.1.
2.
Remove the Waste Toner Cartridge.
3.
Remove the Left Cover,
REP
28.3.
4.
Disconnect all connections to the Joint Board.
5.
Remove 4 screws (metal) that secure the Joint Board to the chassis, Fgiure 1.
Figure 1 Remove the Interconnect Board screws
Repairs
REP 9.8, REP 10.1
WARNING
REP 10.1 Duplex Unit
Parts List on
PL 10.25 Item 26
Removal
Pull the Duplex Unit out using the handle,
Figure 1 Remove the Duplex Unit
5/2011
4-84
Figure
1.
Revision - Xerox Internal Use Only
Phaser 4600/4620 Printer Service Manual