Rep 12.16 Staple Interlock Switch; Rep 12.17 Finisher Rear Door - Xerox Phaser 4620 Service Manual

REP 12.16 Staple Interlock Switch

Parts List on PL 12.45 Item 5
Removal
Switch off the electricity to the machine. Disconnect the power cord from the customer
supply while performing tasks that do not need electricity. Electricity can cause death or
injury. Moving parts can cause injury.
1. Separate the Finisher from the printer,
2. Remove the right cover, REP 12.11.
3. Remove 1 screw that secures the switch to the Finisher,
Figure 1 Remove the Stapler Interlock Switch
4. Slide the insulation off the switch terminals and using a small screwdriver, release the har-
ness connectors from the switch, Figure
Figure 2 Remove the switch from the harness
Revision - Xerox Internal Use Only
Phaser 4600/4620 Printer Service Manual
WARNING
GP 14.
Figure 1.
2.

REP 12.17 Finisher Rear Door

Parts List on PL 12.10 Item 4
Removal
Switch off the electricity to the machine. Disconnect the power cord from the customer
supply while performing tasks that do not need electricity. Electricity can cause death or
injury. Moving parts can cause injury.
1. Separate the Finisher from the printer,
2. Remove the right cover, REP
3. Remove the left cover, REP 12.1.
4. Release the hinges from the 2 bearings and remove the door,
Figure 1 Remove the rear door
Replacement
Install the bearings with the Rear Door closed and hinges in the slots.
5/2011
4-141
WARNING
GP 14.
12.11.
Figure 1.
REP 12.16, REP 12.17
Repairs