Gp 17 Installation Space Requirements - Xerox Phaser 4620 Service Manual

GP 17 Installation Space Requirements

Do not work in a confined space. 1 m (39 inches) space is needed for safe working.
USA and Canada. Do not install this machine in a hallway or exit route that does not
have 1.12 m (44 inches) of space additional to the normal space requirements in front of
the machine. To conform with fire regulations this additional 1.12 m (44 inches) of space
is needed in front of the machine in hallway and exit route
Space Requirements
Figure 1 shows the required amounts of space needed to properly operate and service the
machine.
1. In order to function properly, the printer must be placed on a flat surface with the following
minimum clearances, Figure 1.
Figure 1 Minimum Clearances
General Procedures/Information
GP 17
WARNING
WARNING
2. Mounting surface flatness must be within the specified range.
3. The printer must not be tipped or tilted more than 10 mm in either direction.
Figure 2 Tilting Specifications
Dimensions
Table 1 Print Engine
Dimensions N/ DN/ DT
Width 18.3 in. (46.4 cm)
Depth 20.5 in. (52.1 cm)
Height 16.4 in. (41.9 cm)
Weight 66.0 lbs. (30.2 kg)
5/2011
6-16
Revision - Xerox Internal Use Only
Phaser 4600/4620 Printer Service Manual