Rep 9.1 Transfer Roller; Rep 9.2 Adc Sensor - Xerox Phaser 4620 Service Manual

REP 9.1 Transfer Roller

Parts List on PL 9.10 Item 2
Removal
Switch off the electricity to the machine. Disconnect the power cord from the customer
supply while performing tasks that do not need electricity. Electricity can cause death or
injury. Moving parts can cause injury.
Cover the Drum Cartridge to prevent light exposure.
1. Open the Top Door.
2. Remove the Toner Cartridge.
3. Remove the Drum Cartridge.
4. Release 2 clips that secure the Transfer Roller and remove the roller,
Figure 1 Removing the Transfer Roller
Revision - Xerox Internal Use Only
Phaser 4600/4620 Printer Service Manual
WARNING
CAUTION
Figure

REP 9.2 ADC Sensor

Parts List on PL 8.50
Removal
Switch off the electricity to the machine. Disconnect the power cord from the customer
supply while performing tasks that do not need electricity. Electricity can cause death or
injury. Moving parts can cause injury.
Cover the Drum Cartridge to prevent light exposure.
1. Open the Top Door.
2. Remove the Toner Cartridge.
3. Remove the Drum Cartridge.
1. 4. Remove 3 screws (plastic) that secure the transfer roller guide plate,
Figure 1 Remove the transfer roller guide plate
5. Remove 2 screws that secure the sensor holder to the frame,
5/2011
4-79
WARNING
CAUTION
Figure
Figure 2.
REP 9.1, REP 9.2
1.
Repairs