Figure 2 Remove the cable guide
12. Remove 2 screws (metal) that secure the right side of the power supply tray to the chas-
sis,
Figure
3.
Figure 3 Remove the right side power supply tray screws
Revision - Xerox Internal Use Only
Phaser 4600/4620 Printer Service Manual
13. Remove 2 screws (metal) that secure the left side of the power supply tray to the chassis,
Figure
4.
Figure 4 Remove the left side power supply tray screws
14. Remove 2 screws (shank, metal) that secure the Fuser connector to the power supply
tray,
Figure
5.
15. Disconnect CN3 from the HVPS and move the Fuser harness to the side,
5/2011
4-5
Figure
5.
Repairs
REP 1.4