Pl 8.15 Tray 2 Pick-Up Assembly - Xerox Phaser 4620 Service Manual

PL 8.15 Tray 2 Pick-up Assembly

Item Part Description
1 – Baseplate (P/O PL 8.15 Item 21)
2 – Holder (P/O PL 8.15 Item 21)
3 – Housing (P/O PL 8.15 Item 21)
4 – No paper sensor actuator (P/O PL
8.15 Item 21)
5 – Duplex feed sensor actuator (P/O
PL 8.15 Item 21)
6 – Drive gear (P/O PL 8.15 Item 21)
7 – Paper guide (P/O PL 8.15 Item 21)
8 – Shaft (P/O PL 8.15 Item 21)
9 – Static eliminator (P/O PL 8.15 Item
21)
10 022N02232 Feed roller
11 – Idle forward roller (P/O PL 8.15
Item 21)
12 – One way gear (P/O PL 8.15 Item
21)
13 – Feed idle gear (P/O PL 8.15 Item
21)
14 – Feed joint gear (P/O PL 8.15 Item
21)
15 – Spring (P/O PL 8.15 Item 21)
16 – Bearing (P/O PL 8.15 Item 21)
17 – Bearing (P/O PL 8.15 Item 21)
18 – Tray up limit switch (P/O PL 8.15
Item 21)
19 130N01628 Duplex feed sensor (Q08-700)/
Registration sensor (Q07-250)/ No
paper sensor (Q07-210)
20 – Not Used
21 001N00527 Feed assembly
Parts Lists
PL 8.15
5/2011
5-14
Revision - Xerox Internal Use Only
Phaser 4600/4620 Printer Service Manual