Setting The Fixed Line Network Connection; Configuring/Changing The Isdn Connection (Msn) - Siemens Gigaset DX800A all in one Setup & User Manual

Active (only for VoIP connections and Gigaset.net connection)
You can use the option in the Active column to activate (
VoIP connections. If a connection is deactivated, the phone will not register for
this connection. The connection can be activated/deactivated by clicking
directly on the option. The change does not need to be saved.
To configure a connection or to change the configuration of a connection:
¤
Select the Edit button next to the connection.

Setting the fixed line network connection

¤
Open the Settings
¤
Select Edit in the Fixed Line Connection area.
Connection Name or Number
You can define a name for your telephone connection, which replaces the
default name Fixed Line in displays or lists. Enter a name of up to 16 characters
or the phone number of your fixed line network connection.
Recall
Your phone comes preset with a recall for general operation of the phone on the
main connection. The recall specifies the duration of the line interruption used
to send control signals to the exchange or the telecommunications system
(transfer (ECT), setting up a consultation call, etc.). For operation on a PABX, you
may have to change this value. Please refer to the user guide for your PABX.
Select the required recall from the list.
¤
Select Set to save your settings.
Or:
¤
Click the Cancel button to reject the changes you have made.
This returns you to the list of connections.

Configuring/changing the ISDN connection (MSN)

Please note
You can only change the settings for MSNs that do not have call divert activated
(information on activating call divert can be found in the detailed user guide on
the enclosed CD).
¤
Open the Settings
¤
In the ISDN Line Connections (MSN) area, click the Edit button in front of the
MSN that you want to configure or whose properties you want to change.
Connection Name
Enter a name for the MSN (max. 16 characters). This name is displayed on the
base, for example in the lists for receive/send connections and in the call lists as
receive connection (number that the caller dialled).
If you do not enter a name, the default name MSN1, MSN2 etc. is used.
¢ ¢
Telephony Connections Web page.
¢ ¢
Telephony Connections Web page.
) and deactivate (
21
)