Paper Weight - Kyocera Mita FS-1800/N User Manual

>>Paper Weight
?
ENTER
ENTER
MENU
Setting the Paper Weight
You can set the paper thickness for your custom paper type to be
customized.
1
Display the custom paper type (see
page 1-107) and press the > key.
2
Press the or
>>Paper Weight
Normal
3
Press the ENTER key. A blinking question mark (?) appears.
>>Paper Weight
? Normal
4
Press the or
display changes as shown below. For details of the default setting for
each paper type, see section
Normal
Heavy (Thick)
Light (Thin)
If you want to abandon the setting procedure, press the CANCEL
key.
5
When the desired paper thickness displayed, press the ENTER key.
6
Press the MENU key. The message display returns to Ready.
If the paper type is set to Custom and the option duplexer is installed
on the printer, duplex printing can be enabled and disabled. See
Setting the Duplex Path
1-109
Customizing Paper Type
key repeatedly until >>Paper Weight appears.
key to display the desired paper thickness. The
4.3 Paper Type
on the following page.
Using the Operator Panel
on
on page 4-11.