Kyocera Mita FS-1800/N User Manual page 62

Using the Operator Panel
Option
MENU
ENTER
ENTER
Printing a Network Card Interface Status Page
To use this function, the network interface card must be installed on the
printer. The FS-1800N/FS-3800N come standard with a network interface
card installed.
You can have your printer print out a status page for the network interface
card each time the printer is turned on. The network interface card status
page shows the firmware version, the network addresses, and other
information under various network protocols about the network interface
card. The default setting is On (print).
Printing out a network interface card status page may not be possible
with some network interface cards. For details, see the manual for the
network interface card.
Note
1
Press the MENU key.
2
Press the
Interface
Parallel
3
Press the ENTER key. A blinking question mark (?) appears.
Interface
? Parallel
If you want to abandon the interface selection procedure, press the
CANCEL key. The interface remains unchanged.
4
Press the
Interface
? Option
5
Press the ENTER key again. A > appears.
Interface
Option
or key repeatedly until Interface > appears.
or key repeatedly until Option appears.
>
1-48