Kyocera Mita FS-1800/N User Manual page 58

Using the Operator Panel
ENTER
MENU
8
Press the
changes as shown below.
The baud rate can be selected from 1200, 2400, 4800, 9600 (default),
19200, 38400, 57600, and 115200.
Some computers may not be compatible with a baud rate of 115200 bps.
If you set the baud rate to 115200 and communication problems occur,
lower the baud rate.
Note
9
Display the desired baud rate and press the ENTER key.
10
Press the MENU key. The message display returns to Ready.
or key to display the desired setting. The setting
1-44