Printer Reset; Self Test; Please Wait - Kyocera Mita FS-1800/N User Manual

>Printer Reset
MENU
?
ENTER
ENTER
Printer Resetting
The procedure described below resets the printer's temporary conditions,
such as the current unit of measurement, page orientation, font, character
code set, margins, etc., set by commands to their default values.
1
Press the MENU key.
2
Press the or
Others
3
Press the > key.
4
Press the or
>Printer Reset
5
Press the ENTER key. A question mark (?) appears.
>Printer Reset ?
If you want to abandon the printer resetting procedure, press the
CANCEL key
6
Press the ENTER key again. Self test appears while the printer is
resetting itself, then Please wait followed by Ready.

Self test

Please wait

>Ready
1-123
key repeatedly until Others > appears.
>
key repeatedly until >Printer Reset appears.
Using the Operator Panel