Kyocera Mita FS-1800/N User Manual page 269

Printing through Application Software
5
Click the Properties button. The Properties dialog box is displayed.
Click the Options tab and then checkmark the Job Retention check
box.
6
Click the Job tab. Click the Proof and Hold radio button. Then
checkmark the Custom Job Name and User Name check boxes
below. Enter the desired names for Custom Job Name and User
Name. The names entered here will appear on the printer operator
panel when printing using the operator panel.
If nothing is entered, NO JOB NAME and NO USER NAME will appear
for Custom Job Name and User Name respectively.
7
Click the OK button. The Print dialog box is displayed again. Click
the OK button to start printing. The print job will be stored to the
Microdrive as it is printed.
The printer will first print only one copy if you set to print multiple
number of copies, allowing you to check the printouts. If there is no
problem, resume printing the remaining copies using the Quick
Copy menu in the e-MPS menu at the printer operator panel. For
details, see page 1-21 in the User's
3-14
Manual.