Using The Duplexer (Du-60) - Kyocera Mita FS-1800/N User Manual

3.2

Using the Duplexer (DU-60)

3
Enter a name for your custom size and click the Add button.
4
Select the unit of measurement, Inches or Millimeters.
5
Enter the height and width of the custom size in Size.
6
Click the OK button. The Print dialog box is displayed again. Click
the OK button to start printing.
1
Browse File > Print. The Print dialog box will be displayed.
3
2
Click on the Name pull-down list, all the printers installed under
Windows are listed. Click the name of the printer you want to use.
3
Select the range of the pages you want to print in the document, All
or Current page only in Page range. To print part of the document,
enter page numbers separated by commas.
4
Specify the number of pages you want to print in the Number of
copies combo box in Copies.
5
Click the Properties button in the Print dialog box. The Properties
dialog box is displayed.
6
Click the Output tab.
Printing through Application Software
Name settings
Add button
Units
Paper size
3-5
2
4