Paper Weight - Kyocera Mita FS-C5016N Operation Manual

3.10 Paper Handling
8
Press the key and proceed to
Setting the Paper Weight
You can set the paper thickness for your custom paper type to be customized.
1
Display the custom paper type (see
page 3-81) and press the
2
Press the or
>>Paper Weight
Normal 1
3
Press the ENTER key. A blinking question mark (?) appears.
>>Paper Weight
? Normal 1
4
Press the or
shown below. For details of the default setting for each paper type, see
Handling Paper, section 2.5 Paper Type on page
Light
Normal 1
Normal 2
Normal 3
Heavy 1
Heavy 2
Heavy 3
Extra Heavy
5
When the desired paper thickness displayed, press the ENTER key.
6
Press the MENU key. The display returns to Ready.
If the optional duplexer is installed on the printer, duplex printing can be enabled and
disabled. See Setting the Duplex Path
Setting the Paper
section 3.10.9 Creating Custom Paper Type on
key.
key repeatedly until >>Paper Weight appears.
key to display the desired paper thickness. The display changes as
on the following page.
3-82
Weight.
Chapter 2
2-21.