Table of Contents
Advertisement
Chapter 2 Operating the Page Printer
2-54
Press the 4 key after selecting the paper type you want to customize. Pressing the + or - - - - keys will
3.
cycle through a display of the submenus given in the table below.
Submenus displayed
>>Paper weight
>>Fuser mode
>>Duplex path
(only when the paper type
is Custom #)
Display the submenu to be set and press the ENTER key. A ? will flash. Press the + or - - - - keys to
select the desired parameter.
>>Paper weight
? Normal
Press the CANCEL key if you want to cancel the setting. The ? will disappear.
Selection parameters
Light(Thin)
Sets the paper thickness
Normal (default)
Heavy (Thick)
Vellum
Sets the temperature for the fusing
Low
unit.
Middle (default)
High
Enable (default)
Selects duplex printing on/off when
Disable
an AD-31 is installed (setting active
only for the selected paper type)
(Example: Setup menu for Paper weight)
Description
Advertisement
Table of Contents
