Using the Operator Panel
Option
?
ENTER
ENTER
MENU
Setting the Duplex Path
To use this function, the duplexer must be installed on the printer.
If the paper type is set to Custom and the option duplexer is installed on
the printer, you can set whether or not to enable duplex printing as follows.
The default setting is Enable.
1
Display the custom paper type (see
page 1-107) and press the > key.
2
Press the
or
>>Duplex path
Enable
3
Press the ENTER key. A blinking question mark (?) appears.
>>Duplex path
? Enable
4
Select Enable or Disable using the
default setting for each paper type, see section
page 4-11.
If you want to abandon the setting procedure, press the CANCEL
key.
5
Press the ENTER key.
6
Press the MENU key. The message display returns to Ready.
1-110
Customizing Paper Type
key repeatedly until >>Duplex path appears.
or
key. For details of the
4.3 Paper Type
on
on